All

LYG-15-8000

1.Shade / Sensitivity / Delay Time Stepless Adjustment
2.Large View with 4 Independent Sensors
3.1/1/1/1 Highest Optical Class
4.1/25,000 sec. Fast Switching Speed
5.Shade Range 5-9/9-13 for More Welding Applications
6.Used to switch 3 working modes： WELD/CUT/GRIND

Inquiry

Overview
Parameter
Application
Packaging & Shipping
Video
Inquiry

Premium Arc Sensors：This product builds four arc sensors inside, each sensor can work independently and detect welding arcs easily.The arc sensor focuses on the welding arcs without any interference from surroundings.
Shade/Sensitivity/Delay Time Stepless Adjustment：Knob design with clear interface, you can easily adjust control knob to achieve shade, delay time from 0.1 to 1 seconds, sensitivity from low to high level.
Shade Range 5-9/9-13：For most welding/cutting applications, also including grinding mode.
Highest Optical Class 1/1/1/1：Top quality ADF lens, optical class: 1/1/1/1, which can provide ultra-clear view and best protection for users’ eyes.
High Resolution Lens Technology：High resolution lens technology brings high-definition visual experience, increases eyes comfort, and reduces fatigue greatly, especially for long time welding job in Industrial field.

LYG-15-8000

Recommend Auto Darkening Filter

welding

metal processing

PACKAGING & SHIPPING

Packing Method A: 1) Wrap the welding helmet in a plastic bag
2) Put the manual into the color box
3) Put the welding helmet wrapped in plastic bag into the color box
4) Put 6pcs of welding helmet in color boxes into the master carton
5) Sealing and packing（740×490×345mm）
Note: This packing method takes up a large space. But you don't need to assemble them after receiving the goods, and the surface of the product is less scratched.

Packing Method B: 1) The face shield and headgear of the welding helmet
2) Wrap the face shield of welding helmet in a plastic bag
3) Place 20pcs of color boxes flat at the bottom of the master carton
4) Put 20pcs of manuals into the master carton
5) Put 20pcs of face shields and headgears of the welding helmet into the master carton
6) Sealing and packing（725×485×430mm）
Note: This packing method saves space. But after receiving the goods, you need to assemble the headgear with the face shield yourself, and due to the friction between the face shields during transportation, there may be some scratches on the surface of the product.

Packing Method C: 1) The face shield and headgear of the welding helmet
2) Wrap the face shield of welding helmet in a plastic bag
3) Put 20pcs of manuals into the master carton
4) Put 20pcs of face shields and headgears of the welding helmet into the master carton
5) Sealing and packing（580×520×410mm）
Note：This packing method has fewer color boxes than packing method B